commit 456b7c8461069d5e5cc26a10241476af0dd16f97
parent b06c876a9b7a3c8dfadfc1c38979f0b5947ec72a
Author: fundamental <mark.d.mccurry@gmail.com>
Date: Mon, 6 Jul 2009 19:44:32 -0400
Improved/fixed latex/pdf output
Diffstat:
2 files changed, 48 insertions(+), 51 deletions(-)
diff --git a/doc/mididefaults.txt b/doc/mididefaults.txt
@@ -1,26 +1,22 @@
Appendex A: MIDI Defaults
=========================
-:Author: Paul Nasca
.Default MIDI Connections
-[width="50%"]
-|===============================================
-|Parameter |GM|Controller Number
+[literal]
+001 - Modulation Wheel
+007 - Volume
+010 - Pan
+011 - Expression
+064 - Sustain
+065 - Portamento Enable
+071 - Filter Q
+074 - Filter Cutoff
+075 - Bandwidth(*)
+076 - Modulation Amplitude(*)
+077 - Resonance Center Frequency(*)
+078 - Resonance Bandwidth(*)
+120 - All Sounds Off
+121 - Reset All Controllers
+123 - All Notes Off
-|Pitch Blend |T |N/A
-|Modulation Wheel |T |1
-|Volume |T |7
-|Pan |T |10
-|Expression |T |11
-|Sustain |T |64
-|Portamento Enable |T |65
-|Filter Q |T |71
-|Filter Cutoff |T |74
-|Bandwidth |F |75
-|Modulation Amplitude |F |76
-|Resonance Center Frequency|F |77
-|Resonance Bandwidth |F |78
-|All Sounds Off |T |120
-|Reset All Controllers |T |121
-|All Notes Off |T |123
-|===============================================
+The entries with `(*)` are not within the General Midi specification
diff --git a/doc/nrpn.txt b/doc/nrpn.txt
@@ -34,9 +34,10 @@ I advise you to change only when the sound volume that passes thru the effect to
Some parameters produce clicks when are changed very fast.
Here are the effects parameter number (for Data entry coarse).
-The parameters that produces clicks are written in [red]#red#.
+The parameters that produces clicks are written in [red]#red# and have (AC)
+after their entry (always clicks).
The parameter that produces clicks only when they are changed fast are written
-in [orange]#orange#.
+in [orange]#orange# and have a (FC) after the entry (Fast Clicks).
Most parameters has the range from 0 to 127.
When parameters have another range, it is written as [low...high] .
@@ -44,28 +45,28 @@ Reverb
------
[verse]
-+[orange]#00 - Volume or Dry/Wet#
-[orange]#01 - Pan#
++[orange]#00 - Volume or Dry/Wet (FC)#
+[orange]#01 - Pan (FC)#
02 - Reverb Time
-[orange]#03 - Initial Delay#
+[orange]#03 - Initial Delay (FC)#
04 - Initial Delay Feedback
[grey]#05 - reserved#
[grey]#06 - reserved#
07 - Low Pass
08 - High Pass
09 - High Frequency Damping [64..127] 64=no damping
-[red]#10 - Reverb Type [0..1] 0 - Random, 1 - Freeverb#
-[red]#11 - Room Size#+
+[red]#10 - Reverb Type [0..1] 0 - Random, 1 - Freeverb (AC)#
+[red]#11 - Room Size (AC)#+
Echo
----
[verse]
-+[orange]#00 - Volume or Dry/Wet#
-[orange]#01 - Pan#
-[red]#02 - Delay#
-[red]#03 - Delay between left and right#
-[orange]#04 - Left/Right Crossing#
++[orange]#00 - Volume or Dry/Wet (FC)#
+[orange]#01 - Pan (FC)#
+[red]#02 - Delay (AC)#
+[red]#03 - Delay between left and right (AC)#
+[orange]#04 - Left/Right Crossing (FC)#
05 - Feedback
06 - High Frequency Damp+
@@ -74,8 +75,8 @@ Chorus
------
[verse]
-+[orange]#00 - Volume or Dry/Wet#
-[orange]#01 - Pan#
++[orange]#00 - Volume or Dry/Wet (FC)#
+[orange]#01 - Pan (FC)#
02 - LFO Frequency
03 - LFO Randomness
04 - LFO Type [0..1]
@@ -83,33 +84,33 @@ Chorus
06 - LFO Depth
07 - Delay
08 - Feedback
-[orange]#09 - Left/Right Crossing#
+[orange]#09 - Left/Right Crossing (FC)#
[grey]#10 - reserved#
-[red]#11 - Mode [0..1] (0=add, 1=subtract)#+
+[red]#11 - Mode [0..1] (0=add, 1=subtract) (AC)#+
Phaser
------
[verse]
-+[orange]#00 - Volume or Dry/Wet#
-[orange]#01 - Pan#
++[orange]#00 - Volume or Dry/Wet (FC)#
+[orange]#01 - Pan (FC)#
02 - LFO Frequency
03 - LFO Randomness
04 - LFO Type [0..1]
05 - LFO Stereo Difference
06 - LFO Depth
07 - Feedback
-[red]#08 - Number of stages [0..11]#
-[orange]#09 - Let/Right Crossing#
-[red]#10 - Mode [0..1] (0=add, 1=subtract)#
+[red]#08 - Number of stages [0..11] (AC)#
+[orange]#09 - Let/Right Crossing (FC)#
+[red]#10 - Mode [0..1] (0=add, 1=subtract) (AC)#
11 - Phase+
AlienWah
--------
[verse]
-+[orange]#00 - Volume or Dry/Wet#
-[orange]#01 - Pan#
++[orange]#00 - Volume or Dry/Wet (FC)#
+[orange]#01 - Pan (FC)#
02 - LFO Frequency
03 - LFO Randomness
04 - LFO Type [0..1]
@@ -117,18 +118,18 @@ AlienWah
06 - LFO Depth
07 - Feedback
08 - Delay [0..100]
-[orange]#09 - Left/Right Crossing#
+[orange]#09 - Left/Right Crossing (FC)#
10 - Phase+
Distorsion
----------
[verse]
-+[orange]#00 - Volume or Dry/Wet#
-[orange]#01 - Pan#
++[orange]#00 - Volume or Dry/Wet (FC)#
+[orange]#01 - Pan (FC)#
02 - Left/Right Crossing
-[orange]#03 - Drive#
-[orange]#04 - Level#
+[orange]#03 - Drive (FC)#
+[orange]#04 - Level (FC)#
05 - Type [0..11]
06 - Invert the signal (negate) [0..1]
07 - Low Pass
@@ -139,7 +140,7 @@ EQ
--
[verse]
-+[orange]#00 - Gain#+
++[orange]#00 - Gain (FC)#+
All other settings of the EQ are shown in a different way.
The N represent the band ("B." setting in the UI) and the first band is 0
@@ -148,7 +149,7 @@ Change the "N" with the band you like.
If you want to change a band that doesn't exist, the NRPN will be ignored.
[verse]
-+[red]#10+N*5 - Change the mode of the filter [0..9]#
++[red]#10+N*5 - Change the mode of the filter [0..9] (AC)#
11+N*5 - Band's filter frequency
12+N*5 - Band's filter gain
13+N*5 - Band's filter Q (bandwidth or resonance)
