commit 5f52cfe708830e217bb7410f1b3e2951f9b4ba33
parent a23f0ef8f5dc74586c370e81f1b6e26a6ecaddcb
Author: Adam <[email protected]>
Date: Mon, 19 Aug 2019 12:25:36 -0500
Update README.MD
Diffstat:
| M | README.MD | | | 32 | ++++++++++++++++++++++++++++++++ |
1 file changed, 32 insertions(+), 0 deletions(-)
diff --git a/README.MD b/README.MD
@@ -402,3 +402,35 @@ Each clock signal from poly clock will update corresponding display line (a.k.a.
ʬ ʬ 蠍⼛ 蠍ೊ蠍ʬ蠍⼛
蠍 ⼛ೊ⼛ 蠍蠍ೊʬ 蠍 ⼛⼛
~~~~
+
+# Polyphonic Utility Modules
+<img src="https://github.com/freddyz/computerscare-vcv-modules/blob/master/doc/computerscare-poly-utilities.png" width="600" alt="Computerscare Polyphonic Utilities" />
+
+
+## Knoly Pobs
+
+16 knobs, polyphonic output, range: 0 - 10 volts.
+
+
+## Boly Puttons
+
+16 latch buttons. On/off voltages selectable via right-click menu. Plugging in a polyphonic signal to the A/B inputs will override the selected on/off values and use the CV signals instead. If a monophonic signal is plugged into the "A" input, its voltage will be used for ALL "off/up" buttons. If an n-channel signal is plugged into the "A" input, the "off/up" button voltages will match the "A" channels up to n, and then re-start at "A" channel 1. Behavior is the same for the "B" input. Note that this behavior is different than the recommended method of handling polyphonic signals.
+
+
+## Roly Pouter
+
+Re-route the channels of a polyphonic signal. If you select an input channel that is higher than the highest available channel of the input signal, the output voltage will be 0.
+
+
+## Soly Pequencer
+
+Sequentially output the individual channel voltages of a polyphonic signal. Connecting a polyphonic signal to the clock input allows for multiple independent sequences. Polyphonic reset channels beyond the number of channels of the clock signal are ignored. I think that the clock/reset buttons will apply to all channels.
+
+
+## Toly Pools
+
+* Display input channel count
+* CV output of the input channel count (1 - 16 channels is linearly mapped to 0 - 10 volts)
+* Knob and CV for setting output channel count (0 - 10 volts linearly mapped to 1-16 output channels)
+* Knob and CV for rotating the polyphonic signal (0 - 10 volts sets rotation of 0-15 channels. For example: rotation of "1" will move input channel 2 -> output channel 1, input channel 3->output channel 2, ... input channel 16 -> output channel 1)
+
